=
Search

Crankshaft and phonic wheel pulley unit assembly

NOTE: To fit the target wheel refer to the operations in Par. 6.6.2.

 

  1. Check that the pin F is mounted properly on the crankshaft G.
  2. Position the pulley unit H on the crankshaft G using the pin mark F (detail M).
  3. Apply Molyslip grease on the screw thread N.
  4. Fix the pulley T with the screw Z (tightening torque of 360 Nm) and remove special tool ST_34 (Fig. 9.33).
Fig 9.92
Wait Loading