=
Search

Idler gear (for 3rd / 4th PTO)

  Important

  • Before proceeding with operation, read Par. 3.3.2.
  

11.5.1 Disassembly

 

  1. Undo the screw A and remove the gear unit B.

 

 
Fig 11.20
  1. Remove the retainer ring C from the seat of the pin D.
  2. Remove the shoulder washer E, the gear B, the shoulder ring F and the bushing G from the pin G.



11.5.2 Assembly

 

  1. Insert gudgeon D:
    - shoulder ring F (minimum shim)
    - gear B
    - shoulder ring E
    - retainer ring C.
  2. Insert the bushing G on the crankcase L.
Fig 11.21


Fig 11.22
Important
  • Always replace the washer H every time it is disassembled.
    Modified component, see service letter 700019 - 700021 - 700028.
  • Check that the perforated screw A is free from impurities inside it.

  1. Position the gear unit B on the hole J using the bushing G to centre.
  2. Secure the gear unit B using the screw A inserting the washerH (tightening torque at see service letter 700019 - 700021 - 700028).
Fig 11.23

 

Wait Loading