=
Search

Oil pump check

8.7.1 Dimensional and visual check

 


Measure clearance value B between the rotor teeth, the value of allowable wear is MAX 0.28 mm.


 Important
  • Should the results from checks carried out not be in accordance with the conditions described, replace the oil pump A.


Fig 8.27

 

8.7.2 Oil pressure valve check


Measure the free length F of spring D, which must be 47.5 mm.
If the measured value does not correspond to the value indicated, replace spring D.

Tab 8.16

POS DESCRIPTION
B Oil stopper
C Gasket
D Spring
E Piston

Fig 8.28

 

Wait Loading