1.1 Check, adjustment static advance

1.2 Delivery balancing

1.3 Disassembly, reassembly injector-pump

1.4 Disassembly, reassembly pumps

1.5 Setting, reassembly injector

2.1 Every 2500 hours 4th Part Check and replacement of the preheating plugs

2.2 What to do before starting a new engine

2.3 After the first 50 operating hours

2.4 After 10 operating hours Clean the air filter Check the oil level Check the coolant level Clean the radiator

2.5 Every 125 hours Change the oil

2.6 Every 250 hours Check the alternator belt tension Replace the oil filter Replace the fuel filter Check and if necessary replace the rubber hose of the cooling circuit

2.7 Every 500 hours Replace the alternator belt Adjust the clearance between the valves and the rocker arms

2.8 Every 1000 hours Change the coolant Clean and set the injector

2.9 Every 2500 hours 1st Part Replace the synchronous timing belt

2.10 Every 2500 hours 2nd Part Disassemble and reassemble the cylinder head

2.11 Every 2500 hours 3rd Part Precombustion chambers

2.12 Technical information

3.1 Introduction to the filmed sequence

3.2 Disassembly of the cylinder head components

3.3 Cylinder head grinding

3.4 Engine block grinding

3.5 Crankshaft grinding

3.6 Connecting rod check

4.1 Engine Reassembly 1st Part Reassembly of crankshaft and main supports

4.2 Engine Reassembly 2nd Part Reassembly of connecting rods and piston

4.3 Engine Reassembly 3rd Part Determination of cylinder head gasket thickness and cylinder head reassembly

4.4 Engine Reassembly 4th Part Oil sump assembly

4.5 Engine Reassembly 5th Part Timing system reassembly

4.6 Engine Reassembly 6th Part Reassembly of air cleaner and exhaust