- Remove the protective sheet.
- Use a cloth soaked in degreasing product to remove the protective treatment from the external parts.
- Inject lubricating oil (no more than 2 cm3) into the intake ducts.
- Refill the tank with fresh fuel.
- Make sure that the oil and the coolant are up to the MAX level.
- Proceed with the disposal of the AdBlue®/DEF contained in the tank; replace the AdBlue®/DEF pump filter and wash the AdBlue®/DEF tank/circuit with hot distilled water.
- Check the AdBlue®/DEF injector at an authorized Kohler workshop.
- Start the engine and keep it idle at minimum speed for a two about minutes.
- Bring the engine to 75% of MAX rated speed for 5 to 10 minute.
- Stop the engine while the oil is still hot (Par. 6.1), discharge the protective oil in a suitable container.

Warning:
- Over time, lubricants and filters lose their properties, so it is important consider whether they need replacing, also based on the criteria described in Tab. 5.2.
- Replace the filters (air, oil, fuel) with original spare parts.
- Pour new oil (Par. 4.5) up to the MAX level.
- Empty the cooling circuit completely and pour in the new coolant up to the MAX level (Par. 4.6).
|